Corrosion-Resistant Galvanized DIN 315 Wing Nut

Corrosion-Resistant Galvanized DIN 315 Wing Nut

Product Overview We produce wing nuts by cold forging. Standard material is carbon steel, grade 4. The default surface is bright zinc plating for rust prevention. Stainless steel A2 and A4 wing nuts are available for humid or corrosive working space. Threads follow DIN934 coarse thread tolerance...
Send Inquiry
Description

Handan Zhongpin Fasteners Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of corrosion-resistant galvanized din 315 wing nut in China. Welcome to buy bulk high quality corrosion-resistant galvanized din 315 wing nut made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.

 

Product Overview

 

 

We produce wing nuts by cold forging. Standard material is carbon steel, grade 4. The default surface is bright zinc plating for rust prevention. Stainless steel A2 and A4 wing nuts are available for humid or corrosive working space. Threads follow DIN934 coarse thread tolerance and match regular bolts and studs perfectly.

Our size range covers M3 up to M24. We can make big wing style, small wing style and American type wing nuts as requested. Every piece will be checked for wing crack, thread defect and plating flaw before packing. Stable quality helps distributors avoid high return rate caused by broken wings or bad threads.

 

Please specify:

11

01

  • Diameter × length
  • Head type (bugle head, countersunk, etc.)

02

  • Thread type (fine or coarse)
  • Coating (black phosphate, gray phosphate, zinc, etc.)

03

  • Target weight per piece (g/pc)
  • Order quantity

04

  • Packaging (dimensions of the box/outer carton, package weight, and whether the logo style or color can be customized)

 

 Specification

Item Specification
Product Name DIN 315 wing nut; also called butterfly nut, winged nut, thumb nut
Standard DIN 315 (rounded wings); DIN 316 (square wings) and American style available
Material Grade Carbon steel (Q235 / 35#) or malleable iron
Thread Specification M4 to M24, coarse pitch; UNC available on request
Surface Treatment Galvanized, hot-dip or zinc plated; threads re-tapped after coating
Size M4 to M24; wing span scales with thread size (M8 approx. 32 mm)
Typical Applications Solar mounting frames, outdoor furniture, scaffolding, HVAC, electrical enclosures, marine hardware

 

 A wing nut earns its place where tools are awkward and adjustments are frequent. The two wings give enough grip for hand tightening on a solar frame or equipment cover, and the galvanized coating keeps bare steel rust from staining the surface. We re-tap the thread after galvanizing so a standard bolt runs through cleanly.

 

 

Product Dimensions

 

Thread Ø d Wing Span (mm) Mating Bolt
M4 18 M4
M5 24 M5
M6 30 M6
M8 36 M8
M10 48 M10
M12 62 M12
M16 70 M16
M20 86 M20
M24 106 M24

 Dimensions are typical for DIN 315 rounded-wing style. Confirm exact values against your drawing.

 

Solve Your Pain Points

 

The most common complaint about galvanized wing nuts is a thread that refuses to take the bolt. Hot-dip galvanizing builds a layer inside the tapped hole, and without re-tapping, the bolt jams halfway or the wing nut cracks under hand pressure. On a solar site that means a crew carrying taps up to the roofline, adjusting one nut at a time. Our galvanized wing nuts are re-tapped after coating and checked with a go gauge, so the bolt starts smoothly and the wings do the job they were designed for. Installers also notice the wing edges: we deburr before coating, so hand tightening does not leave a raw edge on the glove.

 

Hot Tags: corrosion-resistant galvanized din 315 wing nut, China corrosion-resistant galvanized din 315 wing nut manufacturers, suppliers, factory, special hardware component nut

Send Inquiry