Handan Zhongpin Fasteners Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of adjustable leveling foot with stainless stud and nylon pad in China. Welcome to buy bulk high quality adjustable leveling foot with stainless stud and nylon pad made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Product Overview

A leveling foot is an adjustable support that raises a machine or cabinet off the floor and lets you set it exactly level. This one has a black nylon base with a moulded cone and a stainless steel stud passing through the centre. Two nuts lock the height once it is set. The wide base spreads the load over the floor, and the nylon gives a little under vibration without marking the surface
| tem | Detail |
|---|---|
| Product Name | Leveling foot, also called adjustable foot, leveling pad, machine foot, adjustable support |
| Base Material | Black nylon PA6, optional rubber pad |
| Stud Material | AISI 304 stainless steel, also available in zinc plated carbon steel |
| Thread | M8 to M24 |
| Stud Length | To drawing or from standard range |
| Base Diameter | Selected to suit the load |
| Locking | One or two nuts, set above and below the mounting point |
Application Scenarios

Production equipment. Levels conveyors, workbenches and packaging machines on uneven factory floors.
Cabinets and enclosures. Lifts electrical cabinets off damp floors and keeps doors aligned.
Food and laboratory equipment. Stainless studs and nylon bases are easy to clean and do not rust at the contact point.
Furniture and fixtures. Used on display units and heavy shelving where a fixed height is not practical.
Installation & Fit

Check whether your equipment has a tapped hole or a mounting plate, and choose a stud that matches. Screw the foot into the tapping or through the plate, then fit the lock nut. Set the height by turning the whole foot, then hold the base and tighten the nut against the equipment. Repeat on all feet and check the level across the top of the machine. Leave enough stud inside the base for a firm joint, and do not extend it beyond the point where the thread engagement becomes short. Recheck the nuts after the first day of running.
Precautions
Do not exceed the load rating of the selected base size; a base that is too small for the load will crack at the cone. Do not use an impact tool to tighten the lock nut, as this can damage the nylon. Keep the base flat on the floor; a foot tilted to one side carries only part of its rated load. If the floor is smooth, use the rubber pad to stop the machine walking. Check the nylon against any cleaning chemicals used on site, since strong solvents can attack it.
Hot Tags: adjustable leveling foot with stainless stud and nylon pad, China adjustable leveling foot with stainless stud and nylon pad manufacturers, suppliers, factory


