Handan Zhongpin Fasteners Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of din741 stainless steel u-bolt wire rope clips in China. Welcome to buy bulk high quality din741 stainless steel u-bolt wire rope clips made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Product Overview

A wire rope clip is a simple mechanical fitting used to form an eye or terminate a cable by clamping two parts of the rope together. Each clip has a forged saddle, a U-bolt and nuts. The rope loops back through the saddle, the U-bolt tightens over both the live and the dead end, and the assembly grips by friction. It is the most common way to make a cable end on site without a swaging machine.
- AISI 304 or 316 stainless steel, forged saddle and U-bolt with matching nuts.
- Sizes to suit rope diameters from 3 to 19 mm, marked on each clip.
- Smooth, rounded contact surfaces that do not cut into the rope strands.
- Reusable and adjustable, so a termination can be re-made on site.
- Supplied individually or in sets sized to a complete railing run.
The Detail That Matters

The single most common mistake with wire rope clips is fitting them backwards. The saddle must sit on the long, loaded part of the rope, and the U-bolt must bear on the short tail. Fit it the other way round and the U-bolt crushes the live strands while the saddle only grips the loose end, so the termination can slip under load. The second mistake is using too few clips or spacing them too closely. A single clip will not hold a tensioned cable, and clips crowded together act like one weak point. Use the recommended number for the rope diameter and spread them along the tail so the load is shared. Finally, tighten the nuts evenly on both legs of the U-bolt, then retighten after the cable has been loaded once, because the rope settles into the saddle.
Specifications
| Item | Detail |
|---|---|
| Product Name | Wire rope clip, also called cable clamp, U-bolt rope clamp, wire rope saddle clip |
| Material | AISI 304 or 316 stainless steel |
| Rope Diameter | 3 to 19 mm |
| Components | Forged saddle, U-bolt, two nuts |
| Surface | Polished stainless |
| Supply | Single clips or matched sets |
Hot Tags: din741 stainless steel u-bolt wire rope clips, China din741 stainless steel u-bolt wire rope clips manufacturers, suppliers, factory


