Stainless Steel Wire Rope Kit With Turnbuckles For Cable Railings

Stainless Steel Wire Rope Kit With Turnbuckles For Cable Railings

Product Overview This is a complete wire rope fixing set for cable railings and tensioned barriers. It brings together the stainless steel wire rope, hook-and-eye turnbuckles for tensioning, eye bolts for the timber or metal posts, thimbles to protect the rope at each turn, and ferrules for...
Send Inquiry
Description

Handan Zhongpin Fasteners Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of stainless steel wire rope kit with turnbuckles for cable railings in China. Welcome to buy bulk high quality stainless steel wire rope kit with turnbuckles for cable railings made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.

 

Product Overview

 

4

This is a complete wire rope fixing set for cable railings and tensioned barriers. It brings together the stainless steel wire rope, hook-and-eye turnbuckles for tensioning, eye bolts for the timber or metal posts, thimbles to protect the rope at each turn, and ferrules for terminating the rope ends. Buying the rope and fittings as one kit removes the risk of ending up with a turnbuckle that does not suit the rope diameter or a ferrule that will not grip it.

  • AISI 304 stainless steel wire rope, 7x7 construction, available in 3 to 6 mm diameters.
  • Hook-and-eye turnbuckles let you tension each run after installation without special tools.
  • Eye bolts with a closed ring for post fixing, matched to the rope and turnbuckle size.
  • Stainless thimbles protect the rope where it bends around the turnbuckle eye.
  • Aluminium ferrules for swaging the rope ends; stainless or copper-nickel ferrules available for wet environments.

The Detail That Matters

 

 

A cable railing only stays tight if every part of the set matches the rope diameter. The most expensive mistake is pairing a stainless rope with plain aluminium ferrules in a damp or coastal location. The two metals sit in contact at the swage, and the aluminium corrodes preferentially, so the termination loses its grip from the inside out. The rope itself will outlast the fitting. If the railing is outdoors near the sea, specify stainless or copper-nickel ferrules at the ordering stage. The other point is the thimble: running the rope through a turnbuckle eye without one concentrates the bend at a single point and the strands start to break there. Every kit should include a thimble for every end that turns.

8

Application Scenarios

5 7

 

String light hanging: Decorate patio & backyard with fairy

lights Anti-sag gate kit: Stop wooden gates sagging

Picture hanging wire: Display photos & artwork

Curtain wire: Porch, gazebo & outdoor shade curtains

Wire trellis: Support grape vines & climbing plants

Garden wire / Cable railing: Fence, deck & stair railings

 

Installation & Fit

 

1

Fix the eye bolts to the posts first, then cut the rope to length allowing enough extra for two terminations. Slide a thimble onto each end, fold the rope back, and secure it with a ferrule using a crimping tool. Check that the swage is even on all sides before loading. Hook the turnbuckles between the thimbles and the eye bolts, then turn the bodies to take up slack. Work along the run a little at a time so tension is spread evenly, and finish with the turnbuckle thread still engaged in the body rather than extended to its limit.

 

 

Hot Tags: stainless steel wire rope kit with turnbuckles for cable railings, China stainless steel wire rope kit with turnbuckles for cable railings manufacturers, suppliers, factory

Send Inquiry